Posted On: November 10, 2026
A carpenter was working on the second floor of an apartment building, installing temporary supports for roof trusses. While working near a stairway opening, he fell through and landed on the concrete walkway below.
He suffered a skull fracture and serious brain injuries. He was only 20 years old.
This incident, shared by the Occupational Safety and Health Administration (OSHA), shows how a routine construction task can turn into a life-changing event.
Falls are a leading cause of serious injuries and deaths in construction. Unprotected edges, open stairways, and missing guardrails can put workers at risk, even during everyday tasks.
Construction sites change as buildings take shape. A floor opening may become exposed when a cover is removed, or a guardrail may be taken down to move materials.
Common situations that can lead to falls include:
A fall does not have to happen from a great height to cause serious injuries. Even a fall from a lower level can result in broken bones, head injuries, or permanent disability.
Floor and stairway openings can be difficult to notice when workers are focused on their tasks or carrying materials.
For example, a worker moving materials across a second floor could accidentally step into an uncovered stairway opening.
Under 29 CFR 1926.501(b)(4), workers must be protected from falling through holes more than 6 feet above lower levels. OSHA permits personal fall arrest systems, covers, or guardrail systems around these openings.
Covers must also protect workers from tripping or stepping into or through holes, regardless of the fall distance. They must be secured against accidental movement and marked with the word "HOLE" or "COVER," or color-coded as required by OSHA.
Fall protection includes systems that prevent workers from falling or stop a fall before they reach a lower level.
Under 29 CFR 1926.501(b)(1), workers on walking or working surfaces with unprotected sides or edges 6 feet or more above a lower level must be protected by guardrails, safety nets, or personal fall arrest systems.
Guardrails create a physical barrier along exposed edges. They help prevent workers from accidentally stepping or falling over the edge.
Safety nets are installed below certain elevated work areas to catch workers if they fall. They must meet OSHA requirements for installation, placement, and strength.
These systems are designed to stop a worker after a fall begins. They generally include a full-body harness, connectors, and a suitable anchorage. Depending on the setup, they may also include a lanyard, lifeline, or deceleration device.
The required protection depends on the type of work and the OSHA provision that applies. These systems are not interchangeable in every situation.
Wearing a harness does not automatically protect a worker. The entire fall protection system must be suitable for the task, properly fitted, and correctly connected.
Before starting work, workers should:
Workers should also understand the difference between guardrails and personal fall arrest systems. Guardrails help prevent workers from falling, while personal fall arrest systems stop a worker after a fall begins.
Employers must also have a rescue plan in place for workers who fall while using a personal fall arrest system. A worker left suspended in a harness may experience serious medical complications, so rescue arrangements should be made before work begins.
Employers must plan fall protection before workers begin tasks at elevated locations. They should identify exposed edges, floor openings, stairways, and other areas where workers could fall.
Important steps include:
Supervisors should also check the work area whenever construction tasks change. An area that was safe earlier may become dangerous as work moves to another stage.
OSHA's construction fall protection requirements are covered under 29 CFR 1926 Subpart M. Three important sections include:
For many construction activities, fall protection is required when workers are exposed to falls of 6 feet or more to a lower level. However, some activities have different requirements, so employers must follow the specific OSHA provision that applies to the work.
OSHA 10 and OSHA 30 Construction training cover fall protection topics such as exposed edges, floor openings, ladders, scaffolds, and safe work practices.
Workers who use personal fall arrest systems may also need additional training on the specific equipment and procedures used at their workplace. OSHA 10 and OSHA 30 courses do not replace task-specific training or the employer's responsibility to train workers on the equipment they use.
OSHA Training School offers OSHA 10 and OSHA 30 Construction courses online in English and Spanish. Both courses are self-paced and accessible from any device.
The carpenter in OSHA's incident report was performing a routine task when he fell through a stairway opening. His injuries show why fall protection must be included in construction work planning.
Employers must identify fall risks, provide the required protection, and train workers to use it correctly. Workers should also pay attention to their surroundings and never assume an open edge or floor opening is safe.
Taking a few seconds to check fall protection can help prevent serious injuries and save lives.
Trusted by thousands of workers & supervisors