Posted On: October 27, 2026
The machine stopped running. The noise faded, and the moving parts came to a stop.
A worker approached to clear a jam and get production moving again. From the outside, everything looked safe.
But a machine that has stopped running is not always safe to work on. It may still contain electricity, pressure, or stored energy that can cause parts to move unexpectedly.
That is why workers must follow proper energy-control procedures before starting maintenance or repair work.
Imagine a worker clearing a blockage inside a conveyor system.
The conveyor has been switched off, but another employee can still restart it from a control panel. The worker near the conveyor may have no warning before the belt starts moving.
Now consider another situation.
A maintenance worker is repairing a hydraulic machine. The power is off, but pressure remains trapped inside the system. When the worker loosens a component, the pressure is released unexpectedly.
In both cases, the machines were not running, but workers were still in danger. The problem is that machines can contain energy even when they appear to be off.
Stored energy is energy that remains inside a machine or piece of equipment even after its main power source has been switched off or disconnected.
It can take several forms:
Workers may not be able to see or hear stored energy. However, it can still cause serious injuries if released unexpectedly. That is why stored energy must be released or safely controlled before maintenance or repair work begins.
Turning off a machine usually stops it from running. However, it does not always prevent someone from restarting it or release all the energy stored inside it.
Lockout/tagout, commonly called LOTO, is a process used to control hazardous energy and prevent equipment from starting unexpectedly or releasing stored energy while workers perform maintenance or repairs.
A lockout device prevents an energy-isolating device from being turned back on. A tag provides information that the equipment must not be operated.
The lockout/tagout process may involve:
The exact steps depend on the machine and the workplace's energy-control procedures.
Some maintenance jobs involve several workers. One employee may repair a conveyor while another works on its motor.
In these situations, workers should not assume that the machine is safe just because someone else switched it off or placed a lock on it.
OSHA's energy-control standard requires group lockout procedures to protect each authorized worker involved in the job. Each worker must understand how the lockout process protects them.
Under group lockout procedures, each authorized employee generally applies their own personal lock to the group lockout device or lockbox before starting work. This helps prevent the equipment from being restarted while anyone is still working on it.
The danger does not end when the repair is complete. Before equipment can be restarted, workers must follow the workplace's lockout/tagout procedures and complete several checks.
These steps include:
Each worker should remove their own lock. A worker must never remove another person's lock unless the employer follows OSHA's specific procedure for removing a lock when its owner is not available.
Once all checks are complete, workers have been notified, and everyone is clear of the danger area, the equipment can be returned to service.
Before working on equipment, workers should not ask only:
Is the machine turned off?
They should also ask:
Have all energy sources been isolated, and has the equipment been checked to confirm it is safe to work on?
These are two very different questions.
A stopped machine can still move. A disconnected power source may not release trapped pressure. A control switch may not disconnect every energy source.
Following proper lockout/tagout procedures helps protect workers from unexpected startup and the release of stored energy.
The next time a machine needs maintenance, remember: A machine is not safe to work on simply because it has stopped running.
Trusted by thousands of workers & supervisors